- Large touch screen+shortcut keys, easy to operate.
- Large-capacity polymer lithium battery, with super long working hours.
- Intelligent festing,simple use, powerful function.
- Media of Memory Card+SD card, with super large storage capacity of traces.
- Able to meet FTTx testing needs.
- Several wavelengths can be chosen.
- Solid casing design, dustproof and shockproof.
More powerful performance, much easier operation, more efficient work.
To meet the needs on the wide range of measurement by FTTx, Metropolitan Area Network, Backbone Network and other optical networks.
①Optical interface 1/VFL
②Optical interface 2/OTDR
③Charging indicator
④SD card interface
⑤Power adapter interface
⑥Earphone interface
⑦USB interface
⑧Ethernet interface
Technical Specification 1
| Wavelength (nm) | 850/1300 | 1310/1550 | 1310/ 1490/1550 | 1625 |
| Dynamic range(dB) 2 | 21/19 | 32/30 | 32/30/30 | 344 , 365 |
| Pulse width (ns) | 5,20,40,80160,320,640, 1280 | 5, 10,20,40,80, 160,320,640, 1280,2560,5120, 10240,20480 |
| Event blind zone(m)3 | 10 | ≤1.8 |
| Atenuation blind zone (m) 3 | 20 | ≤10 |
| Display | 5.6” LCD touch screen |
| Linearity (dB/dB) | ±0.05 |
| Loss threshold (dB) | 0.05 |
| Loss resolution ratio (dB) | 0.01 |
| Sampling resolution ratio(m) | 0.125 to 8 |
| Sampling point | 32K |
| Distance uncertainty (m) | ±(1 m + 5 x 10 x distance + sampling interval) |
| Distance scope (km) | 0.3 to 180 |
| Typical real-time refreshing duration (s) | 0.2 |
| Memory capacity of trace | SD Card (4G), > 10000 pieces |
| Duration of measurement | Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable |
General Specification
| Dimension (H x W x D) | 150 x 235 x 66mm |
| Weight | 1.5KG |
| Temperature |  Running temperature -10 C to 50 C
|
|  Memory temperature -40 C to 70 C
|
| Relative humidity | 0% to 95% (non condensation) |
| Power supply | Lithium battery; continuing working duration ≥ 8 hours |
Interface category
| Optical interface | FC/ UPC (PC, and APC are selectable) |
| Data interface | USB interface, SD card interface |
Visible failure orientation VFL
| Wavelength | 650nm |
| Output power (dBm) | ≥ -3 |
| Maximum testing distance | 3KM |
Remarks:
- The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.
- Dynamic range is the data measured under the condition of the maximum pulse width and minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min.
- Measuring conditions of blind zone: reflection event is within 4km, reflection strength < -45dB. Measured by the minimum pulse width.
- Dynamic range measured when there is filter.
- Dynamic range measured when there is no filter.
OTDR Meter:
- Automatic Measurement Mode: Only by selecting the measurement wavelength, the measurement parameters are automatically set, and the trace data is automatically saved and automatically analyzed.
- Multi-wavelength Measurement Mode: In the parameter setting, the wavelength can be automatically switched into the multi-wavelength measurement mode. Under this mode, the analysis can be achieved on the attenuation state of the same fiber section under different wavelengths.
- Trace Fixing Function: It can achieve the same-screen comparison and display of one trace with another real-time trace or the trace under the average measurement, which is very useful for the installation of multi-core fiber or the checking of the aged fiber in the optical fiber network already been installed.
- Multi-wavelength Analysis Function: It can achieve the comparison,display and analysis functions of any trace file.
- FTTx online testing,able to identify the splitter and the fibers end.
- Large-capacity lithium-ion rechargeable battery, with the long standby time over8 hours.
- Bellcore file format (.sor), with the storage of greater than 10,000 traces.
- Communication Light Detection: It can effectively protect the test instrumentation and communication equipments.
- Connection State Detection: To promptly know the connection status of the instrumentation and the fiber for test.
- The Switching of Measurement Mode: Through the shortcut key operation,it can achieve the flexible switching of real-time measurement mode and average measurement mode.
OTDR Traces Manager PC Software:
- To achieve easily the function of bulk amendment and batch printing.
- Able to generate different forms of test reports according to user needs.
- To provide various flexible printing modes: The single-page single-trace printing mode, the batch printing mode, the single-page multi-trace printing mode,the printing mode of multi-waveform display.
- To provide the personalized selection of printing options and page setup.
- The Function of Waveform Difference Comparison: It can open several waveforms in the same window, making more easily the comparison of parameter change caused by fiber aging or other reasons.
F&Q:
1. Q: Are you a manufacturer?
A: yes, we are a manufacturer , FTTH solution and data center total solution provider in Shenzhen, China, established in 2000.
2. Q: What's your MOQ?
A: MOQ can be 1 pcs, but the price is not competitive.More quantity,the price will be more competitive.
3. Q: Can you quote FOB price?
A: yes. We can delivery by air, DHL, TNT, UPC, FEDEX, etc. For big quantity we will deliver it by sea.
We can quote price with freight and lead time for you, after you let us know detailed requirements with quantity.
We have competitive shipping forwarders. For more solutions, you can feel free to contact us.
4. Q: How is your quality?
A: Our production is according to IEC, Europe standard. CE, ISO, RoHS, CPR, and ANATEL certified.
All the products are 100% test before delivery.
5. Q: What's your lead time?
A: It depends on the quantity and products. For fiber optic patch cord, the lead time can be 2 -3 working days within 5000 pcs. We keep the regular products in stock. Also, we can deal with urgent orders.
6. Q: What's your warranty?
A: Depends one different product, we have1 years warranty for patch cord since delivery, but only responsible for non-artificial damage. For artificial damage, we can repair it for you for free, freight will be paid by your side.
7. Q: What's your packing?
A: International export standard package.If you need to print your logo on the packing, please let us know before we quote.
8. Q: Can you offer OEM/ODM?
A: yes, we can. all products accept OEM /ODM. we can sign the Confidentiality Agreement.
9. Q: Can I have a sample?
A: It depends on which products, Free sample provide under 10 usd. Freight will be paid by buyer before delivery.
10. Q: How can I order?
A:1. send mail or inquiries with product name, specification, and quantity to us . Provide your receive address if you need FOB,CIF,CFR price.
2. We will offer our quotation with lead time.
3. After the quotation confirmed, we will send a PI with our bank account.
4. Production will be arranged after the payment received.
5. Confirm the consignee with you before we deliver it.
6. The tracking number will be provided after the delivery.
11.what is your payment term?
A: T/T, Western Union, Paypal, MoneyGram at once. For big amounts, can be 50% deposit in advance, 50% balance paid before delivery.
With the same quality standard, if you could get better price from the market, TAKFLY also could support you same price.
3 years work experience in optical fiber industry, It's honored to be your professional product assistant.
